5
1. Insert microSD card into device.
2. Format microSD card (
Menu/File Management/Format
).
3. Insert the bracket connector into the bracket slot on top of the
device. Slide it across the slot until it clicks into place.
4.
Press bracket suction cup against the windshield. Lower the
bracket suction clamp.
5.
Adjust the camera position and tighten the adjustment knob.
Bracket Suction
Clamp
Adjustment
Knob
Bracket
Connector
Bracket Suction
Cup
6. To remove the bracket from the windshield, hold the device
securely and raise the bracket suction clamp. The devi
c
e should
release from the windshield.
CONNECT TO POWER
1. Connect the car adapter’s miniUSB plug to the DC40GT’s
miniUSB port.
2.
Connect the cigarette lighter adapter plug to the vehicle’s
cigarette lighter port.
3. The device turns on. A red light indicates the device is recording;
a green light indicates the device is in stand-by mode.