4
Seven-Digit Dialing
If.you.can.make.a.local.call.by.dialing.only.7.digits.instead.of.10,.you.can.program.your.local.area.code.in.your.
phone..If.you.get.a.call.from.within.your.area.code,.you.will.only.see.the.7-digit.phone.number..If.you.get.a.call.from.
outside.your.area.code,.you.will.see.all.10.digits..To.enter.an.area.code,.follow.the.steps.below:
Press.
[menu/clear]
..Select.the.GLOBAL.SETUP.menu,.and.then.the.AREA.CODE.submenu.
Use.the.number.keypad.
[0]
.to.
[9]
.to.enter.a.3-digit.area.code..If.an.area.code.has.already.been.stored,.it.will.
appear.in.the.display..Press.
[menu/clear]
.to.delete.the.stored.code,.and.then.enter.a.new.one.
Press
. A confirmation tone sounds.
NOTE:.Do.not.program.an.area.code.if.you.must.dial.all.10.digits.to.make.a.local.call.
Using the DirectLink Feature
Using.the.DirectLink.feature,.a.pair.of.handsets.can.function.as.two-way.radios..You.can.
have.up.to.two.pairs.of.handsets.using.DirectLink.at.a.time..DirectLink.communication.does.
not.interfere.with.the.main.base’s.ability.to.make.or.receive.telephone.calls..You.must.set.
both.handsets.to.use.DirectLink.communication.to.activate.this.feature..Other.handsets.can.
be.used.while.two.handsets.are.in.DirectLink.communication;.however,.the.two.handsets.in.
DirectLink.operation.are.not.able.to.make.or.receive.calls.until.DirectLink.communication.is.
canceled.
Press.
[menu/clear]
and.move.the.cursor.to.the.DIRECTLINK.MODE.menu.
Press.
..The.display.shows.TO.ENTER.DIRECTLINK.MODE.
PRESS.SELECT.
Press.
. A confirmation tone sounds, and DIRECTLINK MODE
COMPLETE.appears.in.the.display.
1.
.
3.
1.
.
3.
Summary of Contents for DCT756 Series
Page 1: ...DCT756 DCT7565...
Page 8: ...DCT756 Parts of the Base 30 Registration button 30...
Page 60: ......