49
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset and the base unit. Your unit ships from
the.manufacturer.with.a.preset.security.code..Resetting.this.code.is.not.normally.necessary..In.the.rare.situation.that.
you.suspect.another.cordless.telephone.is.using.the.same.security.code.or.if.you.are.instructed.to.change.this.code.
by.a.manufacturer’s.Call.Center.Representative,.you.can.change.the.code..To.change.the.digital.security.code:
Reset.all.handsets.(see.page.5).
Re-register.each.handset.by.following.the.steps.on.page.4.
Traveling Out of Range
During.a.call,.as.you.begin.to.move.your.handset.too.far.from.your.base.unit,.noise.may.increase..If.you.pass.the.
range.limits.of.the.base.unit,.you.hear.a.beep.and.see.OUT.OF.RANGE.on.the.display,.and.then.the.handset.returns.
to.standby..You.may.return.to.the.call.if.you.move.your.handset.within.the.range.limits.of.the.base.and.press.
[
/flash]
or.
[ ]
.within.30.seconds.
Common Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve
your.problem,.please.call.our.Customer.Hotline.(see.back.cover.for.contact.information).
Symptom
Suggestion
The.charge.LED.fails.to.light.
when.the.handset.is.placed.in.
the.cradle.
Make.sure.the.AC.adapter.is.plugged.into.the.base.or.the.charger.(if.you.
have.more.than.one.handset).and.wall.outlet.
Make.sure.the.handset.is.properly.seated.in.the.cradle.
Make.sure.the.charging.contacts.on.the.handset.are.clean.
•
•
•
The.audio.sounds.weak.
Move.the.handset.and/or.base.away.from.metal.objects.or.appliances.and.
try.again.
Make.sure.you.are.not.too.far.from.the.base.
•
•
1.
.
Summary of Contents for DCT756 Series
Page 1: ...DCT756 DCT7565...
Page 8: ...DCT756 Parts of the Base 30 Registration button 30...
Page 60: ......