– 4 –
Battery use time (per charge)
Fully charged
• 6 hours continuous use
• 3 days when the handset is in the standby mode
Low battery alert
When the battery pack is very low and needs to be charged, the
phone is programmed to eliminate functions in order to save
power. “
BATT
” appears on the display and you will hear a beep.
If the phone is in use, “
BATT
”
appears on the display and the
handset beeps twice. Complete your
conversation as quickly as possible
and return the handset to the base
unit for charging.
When the call is terminated due to a low battery,
the call will be placed on hold and can be
retrieved from any of the other handsets.
Cleaning the battery charging contacts
To maintain a good charge, it is
important to clean the battery
contacts on the handset and base
unit with a dry cloth or a pencil
eraser about once a month.
Do not use any liquids or solvents.
1
Connect the AC adapter to the
DC
IN 9V
jack to a standard 120V AC
wall outlet.
2
Set the charger on a desk or
tabletop, and place the handset
in the charger as shown.
3
Make sure that the
charge
LED
lights up. If the LED does not
light up, check to see that the AC
adapter is plugged in and that the
handset makes good contact with
the base charging contacts.
UZ624BT (DCX490) 9/17/01 11:48 AM Page 4
Summary of Contents for DCX 490
Page 1: ......
