2
Installing Your Handset
Charge the Battery
1. Unpack the handset,
battery pack, and battery
cover. If the battery cover
is already on the handset,
press in on the notch and
slide the cover down and
off.
2. Line up the battery pack
connector with the jack inside the handset. (The battery
connector will only fit one way.)
3. Push the battery pack connector in until it clicks into place.
Tug gently on the wires to make sure the battery pack is
securely connected.
4. Place the cover over the battery compartment and slide it
up into place.
5. Connect the AC adapter to the charger's
AC IN 8V
jack and
set the cord into the notch. (This adapter might already be
connected.)
6. Plug the other end of the adapter into a standard 120V AC
power outlet.
7. Place the handset in the charger with the display facing
forward. The display on the handset should light up; if it
doesn't, reseat the handset or try plugging the AC adapter
into a different outlet.
#
Charge the handset completely (about 15 hours) before using it.
