17
#
Some of the functions may not be available under the power failure back
up system.
Multi-handset Features
Conference Calling
•
When an outside call comes in, two handsets can join in a
conference call with the outside caller.
•
To join a call that’s already in progress, just press
TALK/FLASH
or
SPEAKER
.
•
To leave the conference call, hang up normally; the other handset
remains connected to the call.
To...
Press...
transfer a call
INTCOM/CLEAR
. The phone puts
the call on hold and prompts you to
select the handset you want to page.
When the other handset accepts the
call, you’ll be disconnected (press
TALK/FLASH
to rejoin the call).
cancel a transfer
TALK/FLASH
to return to the call.
accept a transferred call
INTCOM/CLEAR
to answer the page
and speak to the other handset.
Then, press
TALK/FLASH
to speak
to the caller.
Call Transfer
#
To use the features in this section, you need at least 2 handsets.
•
Your base supports a total of 6 cordless handsets: the one that came
with the base and up to 5 DECT 1705 accessory handsets.
•
You must register accessory handsets to the base before using
them. (Handsets that came packaged with the base are already
registered.)
•
Handsets that aren’t registered display a
Not Registered
message.
For registration instructions, see page 28, or see the accessory
handset manual.
•
If a handset was ever registered to a base, you must reset it before
it can register to a new base; see page 28, or see the accessory
handset manual.
