22
handset to handset Intercom
•
Whenever the phone is in standby, you can make an intercom call
between handsets without using the phone line.
•
You can make an intercom call from any handset, but only two handsets
can be in an intercom call at any time.
•
If an outside call comes in during an intercom page, the phone cancels
the page so you can answer the incoming call.
•
If an outside call comes in during an intercom call, press
HOME/FLASH
to
hang up the intercom call and answer the outside call.
To...
Press...
make an intercom page
MENU/SELECT
and select Intercom
.
Then,
select the handset you want to talk with, or
All
to page all handsets at the same time
cancel a page
END/CLEAR
answer a page
HOME/FLASH
end an intercom call
END/CLEAR.
Both handsets return to standby.
Chain dialing
Voice Message notification
If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1. Enter the code number (up to 32 digits) into the phonebook just like a
regular phonebook entry. Be sure to enter the code number into the
phonebook exactly as you would enter it during a call.
2. When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code number.
3. Press
MENU/SELECT
to send the code. If you change your mind, just close
the phonebook.
If you subscribe to a voice mail service, your phone displays the voice
mail icon (
) when you have a new message. This feature supports
Frequency-Shift Keying (FSK) notification.
After you listen to your messages, the message icon turns off. If it doesn’t,
you can reset it: With the phone in standby, open the menu and select
Global Setup
; select
VMWI Reset
, then select
Yes.
