Connect the Charger
1
Connect the AC adapter
to the
DC IN 9V
jack and
to a standard wall outlet.
2
Set the charger on a desk
or tabletop, and place
the handset in the
charger with the keypad
facing forward.
3
Make sure that the
charge
LED illuminates.
If the LED does not illuminate, check to see that the AC adapter
is plugged in and that the handset makes good contact with the
base charging contacts.
– 3 –
•
Use only the supplied AAD-600S
AC adapter. Do not use any
other AC adapter.
• Place the charger close to the AC
outlet so that you can unplug the
AC adapter easily.
• ”
HS2
” appears on the display
while the handset is charging.
Polarity of the plug
Low battery alert
When the battery pack is very low and needs to be charged, the
phone is programmed to eliminate functions in order to save power.
If the phone is in the standby mode, ”
Low Battery
” appears
on the LCD and none of the keys will operate. If the phone is in
use, ”
Low Battery
” appears and the handset beeps. Complete
your conversation as quickly as possible and return the handset to
the base unit for charging.
Cleaning the battery charging contacts
To maintain a good charge, it is important to
clean the charging contacts on both the
handset and base unit once a month. Use
a dry cloth or pencil eraser to clean.
contacts
