Muting the Microphone
Privacy Mode
Adjusting the Audio Tone
Using the Clarity Boost Feature
Accessing Your Answering Machine
To mute the microphone so the caller can't hear you, press
. Move the cursor to select MUTE and then press
. MUTE ON and appear in the display. Repeat the
procedure to cancel muting.
To prevent other stations from interrupting a call, press
. Move the cursor to select PRIVACY MODE and
then press
. PRIVACY MODE ON and P appear in
the display. Repeat the procedure to turn off privacy mode.
If you aren't satisfied with your phone's audio quality, you can
adjust the Audio Tone of the earpiece. While on a call, press
to cycle through the three audio tone options: low,
natural and high. (The default setting, Natural Tone, is
recommended for hearing aid users.)When the desired option
appears on the display, stop. After two seconds, the displayed
audio tone is set, and the display returns to normal.
If you encounter interference while you are on a call, you can
manually improve the sound by turning on the clarity boost
feature. Press
, move the cursor to select
CLARITY BOOST, and then press
. BOOST ON and
B appear in the display.
Use the same procedure to turn off clarity boost feature,
BOOST OFF appears.
If your base has an answering machine, you can use your
handset to get your messages and change your answering
machine setup. To access the answering machine, press
. The answering machine announces the number of
new and old messages and then wait for your next command.
You have the following options:
[menu/clear]
[select/
]
[menu/clear]
[select/
]
[select/
]
[menu/clear]
[select/
]
[select/
]
(12)
