3. Plug one end of the
short telephone
cord into the
TEL LINE jack on the
Base Unit.
4. Place the
telephone cord
inside the molded
channel on the
bottom of the Base
Unit.
Then plug the other
end of the
telephone cord into
the modular jack on
the wall.
5. Place the Base Unit
on the posts of the
wall plate and push
down until it’s firmly
seated.
6. Plug the AC
Adapter into a
standard 120V AC
wall outlet.
Note: Do not use
an outlet controlled
by a wall switch.
Direct Wall Mounting
If you do not have a standard wall plate, you can
mount your phone directly on a wall. Before
mounting your phone, consider the following:
•
Select a location away from electrical cables,
pipes, or other items behind the mounting
location that could cause a hazard when
inserting screws into the wall.
•
Make sure the wall material is capable of
supporting the weight of the Base Unit and
Handset.
•
Use #10 screws with anchoring devices
suitable for the wall material where the Base
Unit will be placed.
1. Insert two mounting
screws 3
15
⁄
16
inches
apart. Allow about
3
⁄
16
of an inch
between the wall
and screw heads
for mounting the
phone.
2. Plug the AC
Adapter into the
Base Unit.
3. Place the AC
Adapter cord inside
the molded channel.
10
XCI860
860CH1.CHP
Fri Aug 08 17:01:28 1997
Color profile: Disabled
Composite Default screen
