19
FOR WINDOWS NT 4.0
1. Click on
Start, Settings, Control Panel
. Double click on
Network
.
2. Select the
Protocol
tab, and double click on
TCP/IP
Protocol
.
3. When the window appears, select the correct adapter for
your network adapter. If the
Obtain an IP address from a
DHCP Server
is checked, this computer is ready to
communicate with the WNR2004. If it is not, proceed to
step 4.
4. If there is an IP address listed,
WRITE DOWN
this IP
address on the memo page of this manual (page 115).
5. Select the
DNS configuration
tab. If there is an IP address
listed on this tab,
WRITE DOWN
this IP address on the
memo page of this manual (page 115).
NOTE: After you’ve configured your PC to communicate
with the WNR2004, you might need to enter these IP
addresses into the router in order to share your
Internet access through your Cable or DSL modem.
4. Select
Obtain an IP address from a DHCP Server
.
5. Click the
OK
button in the
TCP/IP Properties
window, and
click
OK
in the “
Network
” window.
6. Restart the computer if asked.
Repeat for each PC on your network. When all of your PCs are
configured, continue to Step 3: Basic Router Configuration on
page 21.
20
FOR WINDOWS XP
1. Click on
Start
,
Settings
. If your view is already
Classic
View
, proceed to step 2. Otherwise, switch your view to
Classic View
by right clicking your mouse while the cursor is
over the
Start
button.
2. Double click on
Network Connections
.
3. Right click on the
Local Area Connection
that is associated
with the network adapter you are using, and select the
Properties
option.
4. In the
This connection uses the following items
box,
highlight
Internet Protocol (TCP/IP)
. Click the
Properties
button. If the
Obtain an IP address automatically
is
checked, this computer is ready to communicate with the
WNR2004. If it is not, proceed to step 5.
5. If there is an IP address listed,
WRITE DOWN
this IP
address on the memo page of this manual (page 115).
6. Select the
DNS configuration
tab. If there is an IP address
listed on this tab,
WRITE DOWN
this IP address on the
memo page of this manual (page 115).
NOTE: After you’ve configured your PC to communicate
with the WNR2004, you might need to enter these IP
addresses into the router in order to share your
Internet access through your Cable or DSL modem.
7. Select
Obtain an IP address from a DHCP Server
.
8. Click the
OK
button in the
Internet Protocol (TCP/IP)
Properties
window. Click the
OK
button in the
Local Area
Connection Properties
window.
9. Restart your computer if asked.
Summary of Contents for evolo WNR2004
Page 58: ...115 MEMO 116...
