T H E I N T E G R A T E D A N S W E R I N G D E V I C E
[ 38 ]
www.uniden.com
Setting the Time
The clock on the cordless phone’s answering system starts when power is supplied to
the base. Follow these steps to set the clock to the correct time.
1) Press
clock/menu
.
The system announces “Time”, the current time and
the guidance for setting.
2) Press
select/volume
or
key until the correct
day is announced. The numbers [
] through [
]
are displayed on the base.
3) Press
set
to select the day.
4) Press
select/volume
or
key until you hear the
correct hour setting. The numbers [
] through [
]
are displayed on the base as each hour is announced.
5) Press
set
to select the hour.
6) Press
select/volume
or
key until you hear the
correct minute setting. The numbers [
] through
[
] are displayed on the base as each minute is
announced.
find hs
answer on/off
delete
charge/in use
Digital Answerer
clock/menu
mic
set
select/volume
memo rec
greeting
ringer
• Normally the idle time
for the menu mode is
10 seconds before the
system returns to
standby. However for
setting the time, the
idle time is extended
to two minutes.
• Press and hold
skip/ff
or
repeat/rew
to quickly scroll
through the numbers
on the display.
EXAI3248.Qx 12/12/2 8:12 PM Page 38
