G E T T I N G S T A R T E D
[ 14 ]
www.uniden.com
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:
•
Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
•
Try to mount your phone within 5 feet of a working phone jack to avoid excessive
lengths.
•
Make sure the wall material is capable of supporting the weight of the base
and handset.
•
Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable
for the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall (with their
appropriate anchoring device), 3-15/16 inches apart.
Allow about 1/8 of an inch between the wall and screw heads
for mounting the phone.
2) Refer to steps 1 through 6 on page 13 to mount the telephone.
EXI5160 7/30/3 5:45 PM Page 14
