background image

A D D I T I O N A L I N F O R M A T I O N

[ 40 ]

www.uniden.com

Note on Power Sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.
With normal usage, your battery should last about one year. Please contact your place of purchase or the
Uniden Parts Department for a replacement battery.

Warning:

To avoid the risk of personal injury or property damage from fire or electrical shock, only use the

Uniden battery model and Uniden adapter model specifically designated for this product.

Power Failure

During the period that the power is off, you will not be able
to make or receive calls with the telephone.

Caution

• Use only the specified Uniden battery pack.
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.

Caution

Do not use paint thinner,
benzene, alcohol, or other
chemical products. Doing
so may discolor the sur-
face of the telephone and
damage the finish.

Maintenance

To maintain a good charge, it is important to clean the charging contacts on
both the handset and base unit once a month. Using water only, dampen a cloth
to clean the charging contacts. Then, make sure to go back over the charging
contacts with a dry cloth.

EXI5160  7/30/3 5:45 PM  Page 40

Summary of Contents for EXI5160 - EXI 5160 Cordless Phone





















































Reviews: