background image

Step 2  Install and Charge the Handset Battery

TO INSTALL THE HANDSET BATTERY

When the handset battery pack is fully charged,
after 15-20 hours of charging, plug the telephone
cord into the base unit and then into a telephone
wall jack. 

Your phone is set for tone dialing. If your local
network requires pulse dialing, please see
“Choosing the dialing mode” on page 16.

A

Remove the cover.

TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS

A

Press and hold 

call id/menu

.

B

Press 

or 

to move the pointer to an

option.

C

Press 

select

to change the option setting.

D

Press 

end

to exit, and return the handset

to the base.

OPTIONS INCLUDE

A

AutoTalk

On/Off

B

CIDCW

On/Off

(Caller ID on call waiting)

C

Area Code

Enter/Remove

D

Dial

Pulse/Tone

D

Plug the AC adapter cord into the base
unit and then into a 120V AC outlet.

E

Place the handset in the base and charge
continuously for 15 - 20 hours before using
the phone.

B

Connect the battery pack
connector with the 
correct polarity.

C

Replace the cover.

Note:

There are five setup options available. They are

Caller ID options [AutoTalk, CIDCW (Caller ID on Call
Waiting), Area Code], Dial Mode and Language.

QUICK REFERENCE GUIDE

Step 3  Connect to Phone Line

Step 4 Set Menu Options

Uniden Customer Hotline

at 1-800-297-1023 (Mon

- Fri 7 am to 7 pm,

Sat/Sun/holidays--except

Thanskgiving and

Christmas--9 am to 5 pm,

CST). 

We can also be reached

on the web at

www.uniden.com

Make sure you have received the following items in
the package. If any of these items are missing or
damaged, contact the Uniden Customer Hotline.

• 

Base unit

• 

Handset

• 

AC adapter

• 

Rechargeable battery

• 

Telephone cord

• 

Beltclip

• 

This owner’s manual

• 

Other printed
material

Q U I C K   R E F E R E N C E   G U I D E

[ 3 ]

www.uniden.com

Step 1  Check the Package Contents

E

Language

English/French/Spanish

Summary of Contents for EXI5560 - EXI 5560 Cordless Extension Handset













































Reviews: