10
Charge the battery pack for 12-15 hours before you start using
your phone.
1
Press the battery cover release.
2
Connect the battery pack
connector with the correct
polarity (black and red wires),
then insert the battery pack
into the battery compartment.
3
Slide the battery cover forward
until it snaps into place.
4
Place the handset on the base.
Make sure that the
“
status
”
LED of the base unit lights, and
charging begins. Charge the
battery for at least 12-15 hours.
You can place either side up
for charging the battery.
Red
status
LED
Black
The plastic connectors will
fit together only one way.
Make sure the battery’s
connector is properly
alighned. Use only the
Uniden Battery pack
(model BT-905) supplied
with your phone.
Charging the battery pack
EXL8900 6th HEN 99.8.20 2:22 PM Page 13