Storing Mixed Tone/Pulse numbers
If your Base Unit is set for Pulse Dialing, you can store a mixed mode
number (up to 16 digits) to easily access long distance services or other
services requiring tone inputs.
1.
Remove the Handset from the Base Unit
2.
Press MEMO.
3.
Press the numeric key for the memory location where you want to store
the number. The TALK LED lights.
Note:
After this confirmation beep, you have 20 seconds to enter the
number you want to store. Otherwise, an error tone sounds and
the unit returns to stand-by.
4.
Enter the number to be dialed in Pulse Mode.
5.
Press the TONE button on the Handset
Note:
The
TONE
button counts as one digit.
6.
Enter the number to be dialed in Tone Mode.
If you want to add a pause between numbers, press RDL/P.
7.
Press MEMO; the Handset beeps confirmation and the TALK LED goes out.
Example:
Store 555-1234, plus tone number 765-4321 in memory location 8:
•
Press MEMO
•
Press 8
•
Press 5551234
•
Press RDL/P - To enter delay between numbers.
•
Press TONE. Switches Handset to Tone Mode; counts as one digit.
•
Press 7654321. Number entered in Tone Mode.
•
Press MEMO
•
Handset beeps confirmation and the TALK LED goes out.
8.
Write the stored number and its memory location number on one of the
enclosed stickers.
Erasing a Stored Number
1.
Remove the Handset from the Base Unit.
2.
Press MEMO.
3.
Press the memory location number or the One-Touch Dialing button
you want to clear.
4.
Press MEMO. A long beep confirms that you have erased the number.
17
