EDITING A PHONE NUMBER IN MEMORY
Follow these steps to edit a phone number that you have already
programmed into memory.
1) Remove the handset from the base.
2) Press and hold
memory
until the
confirmation tone sounds. The display
shows the Memory Store screen and any
saved numbers.
3) Use the
:
and
;
keys or number keypad to select the memory
location you would like to edit. The
<
and
>
keys toggle between the
names display and the numbers display.
4) Press
select
. The following screen appears
with the memory location number that
you have selected in the display.
5) With
>
cursor next to
Edit Memory
,
press
select
. The following screen appears,
and a cursor flashes indicating that the
display is ready for the name to be edited.
6) Use the
:
and
;
keys to scroll through the character menu. Use the
<
and
>
keys to move the cursor to the desired location, and enter the name.
7) Press
select
. The following screen
appears, and a cursor flashes indicating
that the display is ready for the number
to be edited.
8) Enter the phone number with the number keypad (direct entry) or the
:
and
;
keys.
18
NOTE
Whenever you are using a
menu screen, you must press
a key within 20 seconds or
the phone will return to
standby. You may also press
memory
to exit a memory
menu at any time.
Memory Store
1
>
SMITH JOHN
2 UNIDEN
NOTE
If you select
Go Back
at any time, no changes
are made and the handset
shows the Memory
Store screen.
NOTE
You may move the
>
cursor down to
Go Back
and
press
select
if you would like to exit this menu.
>
Edit Memory 1
Delete Memory 1
Go Back
Store Name
SMITH JOHN
Store Number
817 555 1212
Summary of Contents for EXR2460
Page 1: ......
Page 32: ...AND FUNCTIONS CONTROLS ...
