25
UNIDEN EZI33XLT
Scanner
Keep the scanner dry. If it gets wet, wipe it dry immediately.
Use and store the scanner only in normal temperature
environments. Handle the scanner carefully: do not drop it.
Keep the scanner away from dust and dirt, and wipe it with a
damp cloth occasionally to keep it looking new.
GENERAL USE
•
Always write down the programmed frequencies in the
event of memory loss.
•
If memory is lost, simply reprogram each channel.
The display shows - - - - - - in all channels when there has
been a memory loss.
•
Always press each button fi rmly until you hear the entry
tone for that key entry.
LOCATION
•
Do not use the scanner in high-moisture environments
such as the kitchen or bathroom.
•
Avoid placing the unit in direct sunlight or near heating
elements or vents.
•
If the scanner receives strong interference or electrical noise,
move it or its antenna away from the source of the noise. If
possible, a higher elevation might provide better reception.
•
Also try changing the height or angle of the antenna.
CLEANING
•
Clean the outside of the scanner with a mild detergent.
•
To prevent scratches, do not use abrasive cleaners or
solvents. Be careful not to rub the LCD window.
•
Do not use excessive amounts of water.
BIRDIES
All radios can receive “birdies” (undesired signals). If your
scanner stops during Scan mode and no sound is heard, it
might be receiving a birdie. Birdies are internally generated
signals inherent in the electronics of the receiver.
Press / to resume scanning. Or press (
L/O)
to lock out the
channel or frequency.
CARE AND MAINTENANCE
UB366AV_EZI33XLT_0119.indd 25
UB366AV_EZI33XLT_0119.indd 25
2012/01/19 20:58:20
2012/01/19 20:58:20
