9
UNIDEN EZI33XLT
Scanner
These guidelines will help you install and use your new scanner:
•
If your scanner receives interference or electrical noise,
move the scanner or its antenna away from the source.
•
To improve the scanner’s reception, use an optional
external antenna designed for multiband coverage. (You
can purchase this type of antenna at a local electronics
store). If the optional antenna has no cable, use 50
ohm coaxial cable for lead-in. A mating plug might be
necessary for the optional antennas.
•
Do not use the scanner in high-moisture environments
such as the kitchen or bathroom.
•
Avoid placing the scanner in direct sunlight or near
heating elements or vents.
INSTALLING AND REPLACING BATTERIES
You can power your scanner using three AA alkaline batteries.
1.
Make sure the power is turned off .
2.
If the belt clip is attached, remove it (See page 12).
3.
Slide the battery compartment cover.
SETTING UP YOUR SCANNER
UB366AV_EZI33XLT_0119.indd 9
UB366AV_EZI33XLT_0119.indd 9
2012/01/19 20:58:19
2012/01/19 20:58:19