Uniden FP 107, Owner'S Manual

Remote Operation

You can operate the FP107 from almost any touch-tone phone or from a rotary phone
using a pocket tone-dialer.
Follow these steps to operate the FP107 remotely.
1.  Dial your phone number from another phone.
2.  When the FP107 answers, enter your remote operation security code (705 factory 

preset). The FP107 beeps once to confirm that you entered the correct code.

3. Enter a remote command (see “Remote Command List”).
4. When you finish, hang up.

Changing the Remote Operation Security Code

The FP107's remote operation security code is preset to 705, but you can change it by

following these steps.
1. Hold down 

until the FP107 beeps once.

2. Press              once. 

705 

and 

SECURITY CODE

are displayed. 

7

flashes.

3. Enter the new 3 digit code.
4. Press 

then press 

to return to the time display.

If you do not complete

each step within 8
seconds, the FP107 exits

setup. Start again from

Step 1.

NOTE

If you do not enter a digit

within 8 seconds, the

FP107 hangs up.

NOTE

20

The FP107 has ten (0–9)

display contrast settings.

NOTE

Setting the Display Contrast

1.  Hold down             until the FP107 beeps once. 

5

and 

LCD CONTRAST

appear.

5 

flashes.

2.  Repeatedly press           or           to select the desired display contrast settings.

3.  Press             to confirm the setting, then press 

to return to the time display.

Using Call Breakthrough

If you screen your calls but want to know when calls come in from certain people, give
them your Call Breakthrough (CBT) Code.
When a caller enters the CBT code during the outgoing message (168 factory preset),
the FP107 alerts you with a series of loud beeps for 35 seconds. To answer the call, pick

up the handset or press                  . If you do not answer, the caller can leave a message
after the outgoing message plays.

Changing the CBT Code

The CBT code is preset to 168, but you can change it by following these steps:
1.  Hold down              until the FP107 beeps once.
2.  Press 

two

times. 

168

and 

SET CBT CODE

are displayed.

3. Enter the new 3 digit code.
4.  Press 

then press             to return to the time display.

store

store

store

stop

store

store

stop

store

store

store

stop

ADVANCED FEATURES

If the FP107 Answer

Machine is off, after 15

rings it will automatically

switch on and answer the

call.

NOTE

speaker