7
Choosing a Channel
Your radio has 14 preprogrammed channels that you can use to talk to others. You must
select the same channel as your party selected.
To choose a channel for the FRS300:
Press the
▲
or
▼
button repeatedly to
select one of the 14 channels.
(The number on the LCD changes to
indicate that a new channel has
been selected.)
Scan Mode
Your radio also allows you to scan for activity from other transmitting radios.
To use the Scan feature:
1. Press the
scan
button to begin
scanning channels. The LCD will
indicate that you are in scan mode.
If a signal is present, the radio will stop
on the active channel. It will remain on
the channel until the transmission ends.
After 2 seconds, it will resume scanning.
The BUSY icon and
icon appear while receiving a transmission.
FRS300.qxd 7/25/00 18:00 Page 7
Summary of Contents for frs 300
Page 1: ......
Page 18: ...Memo ...