10
UNIDEN iGO CAM 65R
Vehicle Recorder
Power On
NOTE
When connected to a car charger with power, the device will
automatically power on and start recording.
1. Connect the DC car adaptor to the power connector USB port found on
the device.
2. Connect the other end of the DC car adaptor to your car’s cigarette
lighter.
3. The device will power on automatically when the car supplies the power
to the device.
4. The red dot on the screen will start flashing and recording starts
automatically.
At other times, press and hold the power button for at least 3 seconds.
NOTE
Be sure insert the SD card before powering up the device.
Format the SD card before you start recording for the first time.
Power Off
When the car’s engine is turned off, the device will automatically turn off in a
few seconds.
At other times, press and hold the power button for at least 3 seconds to turn
off the device. Do no eject the SD card immediately to prevent damage to the
last recorded file.
If you wish to switch the device back on, press and hold the power button for
at least 3 seconds.
NOTE
Only use the DC car adaptor that comes with your device. Any
other adaptor might damage the device.
