7
INSTALLATION AND POWER UP
INSTALLATION SAFETY WARNINGS
WARNING! Failure to comply with the following
warnings could result in an accident or collision,
resulting in death or serious injury.
Do not obstruct the driver’s view or the operation of
the vehicle itself.
Do not place it unsecured on the dashboard or in
front/above an airbag.
Do not mount the camera where it will become a
distraction if it becomes loose.
Do not attempt to operate the camera while driving. If
you need to access the DC2 to change settings, etc.,
pull off the road in a safe manner to do so.
Some state laws prohibit drivers from mounting
anything on the windshield, or restrict mounting to
specific areas of the windshield. It is the owner’s
responsibility to mount the DC2 in compliance with
local laws.
ATTACHING THE DC2
1. Be sure the bracket locking ring is set to
UNLOCK
.
Press the suction cup base to the windshield.
2. Slide the DC2 onto the bracket hook on the top of
the windshield mount until it locks into position.
3. Turn the locking ring to
LOCK
. Make sure the stand
is locked to the windshield.
4. To unmount the stand, turn the locking ring to the
