E-21
Uniden MHS126 Radio Owner’s Manual
Using Your Radio
Turning It On
Press and hold
POWER
for at least two seconds to turn the
radio on. Press and hold
POWER
again to turn the unit off.
Setting It Up
Even though you can change your radio’s settings at any
time, you will probably want to establish initial settings
after you have turned it on for the first time. You will adjust
some of these settings on an as-needed basis, but some
settings might only need to be set once.
Changing the Volume
To change the speaker volume, press
VOL/SQ
to enter
Volume Setting mode.
O
(for volume level 0 - 9) displays.
Press
CHANNEL UP
or
CHANNEL DOWN
to increase or
decrease the volume levels. Press
VOL/SQ
to save.
Setting the Squelch Level
The MHS126 recognizes signals as transmissions if they
exceed a signal strength threshold.
