5
UNIDEN PROSERIES NVR QUICK START GUIDE
QUICK START GUIDE OVERVIEW
This Quick Start Guide provides basic steps to install and turn up Uniden's ProSeries NVR and
cameras. Refer to ProSeries NVR Installation Guide for detailed procedures.
Uniden's ProSeries NVR systems are multi-channel digital recorders that uses the latest high
resolution technology and modern compression techniques. Screen and menu selections
combined with user input simultaneous monitor, record, backup, and play back new and recorded
video files.Additional storage (HDD drives) maybe added if the system supports it.
HARDWARE INSTALLATION
PREREQUISITES
•
Access to standard AC outlet (AC100~240V, 50Hz~60Hz)
• Phillips-head screwdriver may be required
•
HDMI 1080p monitor (for initial boot up)
•
External PoE network switch to add more than 8 cameras (ProSeries 16 ~ 128 channel NVRs)
•
Camera network cables if devices purchased separately (only included in Pro Series kits)
•
Optional 12VDC power supply (if PoE not used)
•
HDMI or VGA cable (HDMI cable included in ProSeries kits)
•
Western Digital Purple or Seagate SkyHawk surveillance hard drives (for systems containing
more than 8 cameras)
DEFAULTS
• Administrator user name: admin.
• Administrator password: No password; leave blank.
•
LAN1 IPv4 address: DHCP auto enabled
•
LAN2 IPV4 address: 192.168.2.189 (if equipped with second network port)
•
Default video resolution: 1080p
• Factory-installed hard drives are formatted and ready to record.
•
Daylight savings time enabled; however, the start and stop dates must be set.
FIRMWARE AND DOCUMENTATION UPDATES
Because Uniden strives to provide the latest technology and quality in all of its products, firmware
updates may be available with no prior notice. Check for updates at support.uniden.com/pro-
support. Update the firmware manually either locally or remotely through a web browser.
INSTALLATION
INSTALLATION REQUIREMENTS
•
Install the device in a horizontal position.
Do not install the device in a vertical or tilted position.
•
The device's operating temperature range is 32˚F to 122˚F (0˚C to 50˚C).
Do not locate the device in places with high temperature, humidity, dust, or smoke.
