Operation
20
UNIDEN PRO5050
AM-CB Transceiver
Priority Watch
To switch Priority Watch On/Off;
1. Press
[MENU/ENTER]
.
The Priority Watch setting flashes.
2. Turn the Rotary Channel Selector to
change the setting between ON or OFF.
3. Press and hold
[MENU/ENTER]
to save
& exit from the menu mode.
NOTE
If SCAN is deactivated while it is tuned to an active channel, the
PRO5050 will stay on that active channel. If none of the channels are
active, the PRO5050 will reinstate the scan start channel.
NOTE
If OS/GS Scanning is initiated when there are no channels programmed
in OS/GS memory, an error tone will be heard and scanning will not start
(see Add/Remove Channels from SCAN Memory).
Add/Remove Channels from Scan Memory
Select which Scanning Mode you wish to
use - OS or GS.
Press and hold
[SCAN/OS/GS]
to switch
between scanning mode.
Select the channel you want to store.
Press to
[MEM]
store.
[M]
icon appears
and a short tone beep is heard.
To remove the channel from SCAN memory, press
[M]
once more.
The MEM icon disappears.
