36
37
5.3.1 Network Setting
Modify the basic network information on the
Network
Setting
screen.
•
NIC:
Select corresponding
NIC
.
• If a device is equipped with double NIC, select the right
NIC.
• If a device is equipped with double NIC without POE,
Network Setting Screen
3G Screen
the network segment of the IP Camera’s access in LAN1
should be the same as NIC1 and NIC2 of LAN2.
• If a device is equipped with double NIC with POE, the
network segment of the IP Camera’s access in the POE
ports should be the same as the NIC2.
•
IP:
Input the relevant IP Address number.
•
DHCP:
Click the check box in front of
DHCP
. It will
automatically input a valid IP according to the router DHCP.
•
Subnet Mask:
Input a relevant IP Subnet Mask number.
•
Default Gateway:
Input a relevant Default Gateway number.
•
MAC:
Displays the present MAC address.
• Remote Port: Input a relevant Remote Port number.
•
HTTP Port:
Input a relevant HTTP Port number, the default
is 80.
•
Enable 3G:
After linking up the 3G accessible equipment,
click the check box in front of
Enable 3G
, select the
Device
Type
, edit the
Phone Number
, select
Work State
, then click
OK
to save:
Summary of Contents for Pro7800N1
Page 1: ...Pro7800N1 NVR User Manual...
