C.
Channel Number — Indicates the current
channel that the scanner is on.
D.
Memory Bank Numbers — Each Memory
Bank consists of 10 channels that you can
select or deselect during scanning operation,
using the numeric keypad. When you select
a Bank, its number appears on the display.
When you deselect a Bank, its number
disappears from the display. When you press
H
to stop scanning, only the Bank of the
current channel appears.
E.
Low Battery Indicator — Appears on the
display when the Battery Pack is low and
needs recharging.
F.
Frequency Indicator — 7-digits plus decimal
indicate the frequency being received by the
scanner.
G.
Mode Indicators — (Only the active mode(s)
are displayed during operation.)
Indicates DATA SKIP activated
during SEARCH.
SCN
Indicates SCAN Mode.
SRCH
Indicates SEARCH Mode. Flashes
when in TURBO SEARCH Mode.
PRI
Indicates PRIORITY SCAN Mode.
HOLD
Indicates SCAN HOLD or SEARCH
HOLD Mode.
DLY
Indicates DELAY is activated.
L/O
In SCAN Mode indicates the
channel shown is “Locked Out”.
In SEARCH Mode, indicates the
frequency shown is “Locked Out”.
WX
Indicates WEATHER SCAN Mode.
k
Indicates the keypad is locked.
2. DIRECT CHANNEL MEMO PAD — Write the names
of the events/activities you program into your
One-Touch Direct Channels (Channels 1- 10).
3. NUMERIC KEYPAD — Use these keys to program a
channel for scanning. Also use to access a channel
directly with
H
. During SCAN Mode, use these
keys to select or deselect any of the 10 memory
banks. (Only the selected bank indicator(s) appear
on the display.)
Note:
You cannot deactivate all 10 banks at the same
time.
7
C:...sc150om.vp
Tue Dec 16 19:00:08 1997
Color profile: Disabled
Composite Default screen
