24
Setting Up Your Scanner
Before installing batteries, set the switch in the battery
compartment to match the type of batteries you will use.
Select
REG. ALK. BATT.
for non-rechargeable battery
types and
NI-MH. BATT.
for rechargeable battery types.
See also “Using Rechargeable Batteries” on Page 25
when you use rechargeable batteries.
1. Remove the battery cover and set the battery switch.
2. Install 2 AA batteries, matching the polarity symbols
(+ -).
WARNING!
Set
REG. ALK. BATT.
/
NI-MH. BATT.
to
NI-MH. BATT.
for use only with rechargeable batteries.
Never attempt to recharge non-rechargeable batteries.
Non-rechargeable batteries can get hot and can even
burst if you try to recharge them.
SC230 Paper OM.fm Page 24 Wednesday, October 6, 2004 10:51 AM