42
Other Settings
Using the PC Control and
Cloning Options
Use the included connection cable to connect your scanner
to another SC230 scanner or your personal computer.
Xfer Information
E
•
PC Control
Lets you set the baud rate your scanner
uses to communicate with a personal computer. See
“Connecting Your Scanner to a Personal Computer”.
•
WIRED Clone
Lets you set your scanner as a master
or a slave, letting you transfer programming to or from
another SC230 scanner. See “Cloning the Scanner”
on Page 43.
•
On_Air Clone
Lets you clone all programmed data
over the air to or from another SC230 scanner.
Connecting Your Scanner to a
Personal Computer
To connect your scanner to a
personal computer, you must
first set the scanner’s baud rate
(the rate at which data is
transferred between the
scanner and the computer, in
bits per second (bps)).
Hint: If you have trouble
transferring data between your
scanner and your
computer, try setting the baud
rate to a slower setting.
Xfer Information
E
PC Control
E
•
Off
The baud rate is not set.
•
9600 bps
The baud rate is set to 9600 bps.
•
19200 bps
The baud rate is set to 19,200 bps.
•
38400 bps
The baud rate is set to 38,400 bps.
•
57600 bps
The baud rate is set to 57,600 bps.
Menu
Menu
SC230 Paper OM.fm Page 42 Wednesday, October 6, 2004 10:51 AM
