background image

 13 

I.C. Notice

TERMINAL EQUIPMENT

NOTICE:

 This equipment meets the applicable Industry Canada Terminal Equipment Technical 

Specifications. This is confirmed by the registration number. The abbreviation, IC, before the 
registration number signifies that registration was performed based on a Declaration of 
Conformity indicating that Industry Canada technical specifications were met. It does not 
imply that Industry Canada approved the equipment.

NOTICE:

 The Ringer Equivalence Number (REN) for this terminal equipment is marked on the 

equipment itself. The REN assigned to each terminal equipment provides an indication of the 
maximum number of terminals allowed to be connected to a telephone interface. The 
termination on an interface may consist of any combination of devices subject only to the 
requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 
five.

RADIO EQUIPMENT

The term “IC:” before the radio certification number only signifies that Industry Canada 
technical specifications were met.

Operation is subject to the following two conditions: (1) this device may not cause 
interference, and (2) this device must accept any interference, including interference that may 
cause undesired operation of the device. “Privacy of communications may not be ensured when 
using this telephone.”

THE FCC WANTS YOU TO KNOW

Changes or modifications to this product not expressly approved by Uniden, or operation of 
this product in any way other than as detailed by the owner's manual, could void your 
authority to operate this product.

This device complies with part 15 of the FCC rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) This device must 
accept any interference received, including interference that may cause undesired operation. 
Privacy of communications, may not be ensured when using this phone.

To insure the safety of users, the FCC has established criteria for the amount of radio frequency 
energy various products may produce depending on their intended usage. This product has 
been tested and found to comply with the FCC’s exposure criteria. For body worn operation, the 
FCC RF exposure guidelines were also met when used with the Uniden accessories supplied or 
designed for this product. Use of other accessories may not ensure compliance with FCC RF 
exposure guidelines and should be avoided.

Uniden works to reduce lead content in our PVC coated cords in our products and accessories.

Warning!

The cords on this product and/or accessories contain lead, a chemical known to the State of 
California to cause birth defects or other reproductive harm. 

Wash hands after handling

.

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation 
in the United States and/or other countries.

UU893BH_TCX440.fm  Page 13  Monday, September 5, 2005  11:49 AM

Summary of Contents for TCX4 Series

















Reviews: