[ 1 3 ] G E T T I N G S T A R T E D
w w w . u n i d e n . c o m
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could
cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths.
• Make sure the wall material is capable of supporting the weight of the base and handset.
• Use #10 screws (minimum length of 1 & 3/8 inches) with anchoring devices suitable for
the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall (with
their appropriate anchoring device), 3 & 15/16
inches apart. Allow about 1/8 of an inch between
the wall and screw heads for mounting the phone.
2) Refer to steps 1 through 7 on page 12 to mount the
telephone.
GE
TTI
NG ST
A
R
TED
