36
Adjusting the Audio Tone
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on
a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.
recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.earpiece,.not.the.speakerphone.
To.adjust.the.audio.tone:
With.the.phone.in.talk.mode,.press.
[select/
]
..to.cycle.through.the.three.audio.tone.options.
When.the.desired.option.appears.on.the.display,.stop..
After.two.seconds,.the.displayed.audio.tone.is.set,.and.the.display.returns.to.normal.
Using the Clarity Boost Feature
If.you.encounter.interference.while.using.your.phone,.you.can.manually.improve.the.sound.by.setting.the.clarity.
booster.to.on..This.works.only.when.the.phone.is.in.use,.so.while.you.are.on.a.call:
Press.
[menu/clear]
.
Move.the.cursor.to.CLARITY.BOOST,.and.then.press.
[select/
]
..BOOST.ON.and.B.appear.in.the.display.
Use.the.same.procedure.to.turn.off.clarity.booster..BOOST.OFF.appears.
Finding a Lost Handset
To.locate.a.misplaced.handset,.press.
[find hs]
.on.the.base.when.the.phone.is.in.standby..All.registered.handsets.
will.beep.for.one.minute,.and.PAGING.appears.on.the.handset.display..To.cancel.paging,.press.
[find hs]
.again.or.
any.key.on.the.found.handset.
)
2)
3)
)
2)