50
Operating the Answering System While You Are Away from Home
You.can.access.your.answering.system.while.you.are.away.from.home.to.check,.play,.and.delete.messages,.or.turn.
your.answering.system.on.and.off.
Note:
The.answering.machine.will.only.playback.messages.for.four.minutes.and.then.it.returns.to.the.command.waiting.
mode..To.continue.playing.your.messages,.press.
[0]
.then.
[2]
.again.within.5.seconds.
If.you.enter.an.incorrect.security.code.three.times,.you.will.hear.a.beep.and.the.answering.machine.will.return.to.
standby.
To.operate.from.a.remote.location,.use.any.touch-tone.telephone,.and.follow.these.steps:
Call.your.telephone.number.and.wait.for.the.system.to.answer..If.the.answering.system.is.off,.it.will.answer.after.
about.0.rings.and.sounds.a.series.of.beeps.
During.the.greeting.or.the.beeps.(if.answering.system.is.off),.press.
[0]
.and.enter.your.security.code/PIN.within.
two seconds (see Setting a Security Code or Personal Identification Number (PIN) on
page.46).
The.answering.system.announces.the.current.time.and.the.number.of.messages.stored.in.memory..
.
You.hear.“To.play.incoming.messages,.press.zero-two..For.help,.press.one-zero”.followed.by.a.beep.
Enter a remote command from the chart below. You have 15 seconds to enter the first command; after the first
command,.you.have.two.seconds.to.enter.each.command.
•
•
)
2)
3)
4)