8
Installing the Beltclip
1.
Place the beltclip on the mounting area
on the back of the
WHAM
, making sure
the hole in the clip lines up with the
notch on the back of the
WHAM
.
2.
Insert the screw into the corresponding
hole and tighten.
Or
1.
Put the alkaline battery tray inside,
and install the 3 AAA batteries in
the tray.
2.
Replace the cover.
3.
Lock both sides of the battery
compartment.
4.
Tighten the screw on the cover.
WHAM_UA466ZL UA01466ZA_0 9/20/02 12:50 PM Page 8