55
Setting Modulation
You can change the modulations of each band. Selected
modulation aff ects both search and Close Call.
For CB band and HAM band, selected modulation also aff ects CB
band and HAM band service search.
For Air band, the modulation is AM only.
1. Press
Func
then
9/Mod
to change the modulation while
holding the frequency.
2.
The scanner displays the modulation for 1 seconds.
3.
Then return previous mode.
Also, you can set Modulation by Search Menu.
Note:
If the scanner is turned off , modulation is set to initial setting
except CB band and HAM band.
CLOSE CALL
Using the Close Call Feature
Unlike searching, which requires the scanner to tune to a
frequency to check for a transmission, Close Call RF capture
directly detects the presence of a strong, nearby signal and
tunes to that frequency.
Close Call RF capture works great for fi nding frequencies at
venues such as malls and sporting events. You can set the
scanner so Close Call detection works "in the background" while
you are scanning other frequencies, turn off normal scanning
while Close Call is working, or turn off the Close Call feature and
use the scanner normally. You can set the scanner so it alerts
you when the Close Call feature detects a frequency. and you
UB374ZV̲UBC125XLT̲130329.indd 55
UB374ZV̲UBC125XLT̲130329.indd 55
2013/03/29 10:34:55
2013/03/29 10:34:55
