18
Listening to AM/FM/TV Channels
Listening to AM/FM/TV Channels
To listen to AM/FM/TV channels, slide the
mode selector to
AM/FM
. Then, press the
button at the top of the scanner to select the
desired source (AM for AM Broadcast, FM1 or
FM2 for FM or TV Broadcast).
Directly Selecting a Channel
Press
SVC/DIR
to select the direct entry
mode. Use the
s
/
t
buttons to step through
the selected band. The scanner stops on active
channels. TV channels are scanned after FM
channels in FM mode.
You can also enter the channel frequency using
the keypad, enter the channel frequency (for FM
or AM) or the TV channel number and press
E/
PGM .
Using the Alarm Clock
UBC330CRS OM.indd 18
10/9/09 12:42:18 PM