27
Operation
Notes:
•
If you have not stored frequencies into any
channels, the scanner does not scan.
•
If the scanner picks up unwanted partial, or very
weak transmissions, turn
Squelch
clockwise to
decrease the scanner's sensitivity to these
signals. To listen to a weak or distant station,
turn
Squelch
counterclockwise.
•
To ensure proper scanning, adjust
Squelch
until
the audio mutes.
Manually Selecting a Channel
You can continuously monitor a single channel
without scanning. This is useful if you hear an
emergency broadcast on a channel and do not want
to miss any details - even though there might be
periods of silence - or if you want to monitor a
specific channel.
To manually select a channel, press
Hold
, enter the
channel number then press
Hold
again.
Or, during scanning, if the radio stops at a channel
you want to listen to, press
Hold
once. (Repeatedly
pressing
Hold
at this time causes the scanner to
step through the channels.) Press
Scan
to resume
automatic scanning.
UB334 Paper OM reduced size.fm Page 27 Friday, September 9, 2005 11:16 AM
