31
Special Features
Func
+ for about 1 second to quickly move
through the search bank numbers.
After choosing the search bank, follow these steps
to set the lower limit and upper limit frequency.
1. Enter the lower limit frequency by using the 0-9
and /Clr
keys.
2. Press
E
to select the lower limit frequency.
3. Enter the upper limit frequency by using the 0-9
and /Clr
keys.
4. Press
E
to select the upper limit frequency.
Search Skip Memory
You can skip up to 50 specified frequencies during a
search. This lets you avoid unwanted frequencies or
those already stored in a channel.
To skip a frequency, press
Func
and
L/O
when the
scanner stops on the frequency during a search or a
search hold. The scanner stores the frequency in
memory and automatically resumes the search if it is
not in hold.
Follow these steps to clear a single frequency from
skip memory so the scanner stops on it during a
search.
1. Press
Hold
to stop the search.
2. Press
Func
+
or
Func
+
to select the
frequency.
L/O
appears.
3. Press
Func
+
L/O
.
L/O
disappears.
To clear all the skip frequencies at once while
searching or search hold, press
Func
then press
and hold
L/O
until the scanner beeps.
UB334 Paper OM reduced size.fm Page 31 Friday, September 9, 2005 11:16 AM
