31
OPERATION
SEARCHING
The UBC75XLT has 10 preset search ranges that display as
1
- 10
across the top of the screen when you press
Srch
. It also
has 10 preset service bands that display in two rows across
the bottom of the screen when you press
Func + Svc
.
Note:
Service Search is discussed on page 33.
When you press
Srch
, the UBC75XLT begins searching the
search ranges until it fi nds activity. The search range number
fl ashes and it remains on that frequency until activity ends.
Press
Srch
at any time to continue.
Press a search range’s corresponding number to turn it off
and back on. For example, press
4
to turn search range #4
off . The number
4
will no longer display across the top of the
screen.
You can search these ranges through:
•
Quick Search - Designate a starting point to search from.
•
Custom Search - Designate and store upper and lower
frequency limits for each of 10 search ranges. The
scanner searches within this range.
Quick Search
Quick Search lets you designate a starting point for
searching. Once you are searching from this point, you can
stop the search and store frequencies in a channel.
1.
If the scanner is scanning or searching, press
Hold
.
2.
Enter the frequency using the number and
. Clr
keys.
The scanner automatically rounds the entered number
UBC75XLT̲UB372BV̲20130401.indd 31
UBC75XLT̲UB372BV̲20130401.indd 31
2013/04/02 11:08:35
2013/04/02 11:08:35
