Feature Highlights
•
1000 Channels
– Program one frequency into each channel. You must have at least one
channel programmed to use the Scan mode.
•
22 Bands
– Includes 22 bands, with aircraft and 800 MHz.
•
25 MHz-1300 MHz
– Indicates the range of frequencies that can be searched within the
bands of your scanner.
Note
: The frequency coverage is not continuous and excludes 512-806 MHz and
960-1240 MHz.
•
10 Priority Channels
– You can assign one priority channel in each bank. Assigning a
priority channel allows you to keep track of activity on your most important channel(s)
while monitoring other channels for transmissions.
•
Priority Plus Scan
– Allows you to scan only priority channels.
•
Air Band Service
– Allows you to search the aircraft frequencies at the press of a button,
and to choice the step from 12.5 kHz or 8.33 kHz.
•
Unique Data Skip
– Allows your scanner to skip unwanted data transmissions and
reduces birdies.
•
Memory Backup
– If power is disconnected, the frequencies programmed in your scanner
are retained in memory.
•
Direct Channel Access
– Go directly to any channel without entering the Menu mode.
•
Attenuator
– Reduces the signal strength on a per frequency basis.
•
Turbo Search
– Increases the search speed to 300 steps per second. This applies only to
transmission bands with 5 kHz steps.
•
Text Tags
– You can customize your scanner by storing text tags (up to 16 characters).
•
Auto Store
– The scanner automatically stores found active frequencies into an assigned
bank.
•
CTCSS/DCS
– The scanner can receive and search for subaudible tones.
10
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 10
