Note:
• You can also
▲
or
▼
when selecting a channel. Press and hold
▲
or
▼
for
1second to move up/down more quickly.
• To clear a mistake while entering the frequency, press
(decimal key) repeatedly
until the display is cleared.
• If you enter a channel or frequency which is out of the
scanner’s range, a beep will sound and
ERROR
appears on the display.
• For each channel, you can also change the step size or
the mode. (See page 53).
Deleting a Stored Frequency
1. Press
MENU
.
2. Select
2:SCAN OPTION
by rotating the
VFO
and
pressing
E
.
3. Select the channel number you want to edit by rotating the
VFO
and pressing
E
.
4. Select
1:FREQUENCY
using the keypad and pressing
E
.
5. Press
0
and pressing
E
.
☞
Remember! You can also use
▲
or
▼
instead of rotating the
VFO
.
Also instead of pressing
E
, you can press the
VFO
control.
Note
: Channels with no frequencies are automatically
locked out.
Editing a Stored Frequency
1. Press
MENU
.
2. Select
2:SCAN OPTION
by rotating the
VFO
and pressing
E
.
3. Select the channel number you want to edit using the keypad and pressing
E
.
4. Select
1:FREQUENCY
by rotating the
VFO
and pressing
E
.
5. Enter a frequency by using
(decimal key) and the keypad and pressing
E
.
☞
Remember! You can use
▲
or
▼
instead of rotating the
VFO
.
Also instead of pressing
E
, you can press the
VFO
control.
Duplicate Frequency Alert
If you enter a frequency which has been stored in other channel,
you will hear a beep and the scanner displays
WARNING
.
Press
(decimal key) to enter a different frequency.
––– OR –––
Press
E
again to store the frequency in both channels.
.
.
.
25
C 010
512.0000 FM
ERROR
OUT OF CHANNEL
C 010
512.0000 FM
ERROR
OUT OF BAND
C 010
512.0000 FM
WARNING
DUPLICATE 017
C1000
0000.0000
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 25
