34
Caution:
After you have entered the search range while still in the Menu mode, you can set
your alpha tag (see page 26), change the step size of the search, or change the
mode. Once the lower and upper parameters of your search are edited, the Menu
screen backs up one level to allow you to modify the step size, receive mode, and
alpha tag.
Select
2:STEPS
for your step size choices and then press
E
or
VFO
. Select
3:MODE
for the receiver mode choices and then press
E
or
VFO
.
Select
4:ALPHA TAG
to enter an alpha tag using the
VFO
and then press
E
.
Starting Chain Search
1. After setting the search ranges, select
1:SEARCH OPTION
/
2:CHAIN SEARCH
/
1:CHAIN SEARCH
by rotating the
VFO
and pressing
E
.
2. Select
1:ON
by rotating the
VFO
and pressing
E
.
3. Press
SRCH
to search up to 10 ranges continuously.
☞
Remember! You can also use
▲
or
▼
instead of rotating the
VFO
.
Also instead of pressing
E
, you can press the
VFO
control.
Note
: • If
CHAIN SEARCH
is
OFF
, only 1 range can be searched.
• When searching stops, press
RSM
to resume searching.
• When you rotate the
VFO
while searching, you can change the search direction to
up or down.
• When searching in WFM, it will stop before reaching the
desired frequency if the step is other than 50 kHz or 100
kHz.
Search Hold Feature
1. Press
▲
/
HOLD
or
LIMIT
/
▼
at anytime to stop the search.
2. Press
RSM
or
SRCH
to resume searching.
Data Skip
A scanner will normally stop on any transmission it receives. This means the UBC785XLT
will occasionally stop on data signals and unmodulated transmissions. You can automatically
skip many of these types of transmissions during search. To
activate the Data Skip feature, enter into the Menu mode.
1. Press
MENU
.
2. Select
3:SYSTEM OPTION
/
7:DATA SKIP
by
rotating the
VFO
and pressing
E
.
3. Select
1:ON
by rotating the
VFO
and pressing
E
.
☞
Remember! You can also use
▲
or
▼
instead of rotating the
VFO
.
SRCH 12.5k
1240.0000 FM
Range 1
25cm Amateur Grp
SYSTEM OPTION
5:PC CONTROL
6:CLONE
7:DATA SKIP
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 34
