37
• Tone Lock (out) mode
You can lock a particular subaudible tone. The scanner won't stop on any transmissions
which have the locked out subaudible tone.
To select the SQ mode:
1. Press
MENU
.
2. Select
3:SYSTEM OPTION
/
8:SQ MODE
by rotating the
VFO
and pressing
E
.
3. Rotate the
VFO
to select one the type from (
1:CSQ
,
2:TONE SQ
,
3:TONE
SEARCH
) and press
E
.
4. To set Tone Lock mode, do the following first, then select
2:TONE SQ
in step 3.
1) For Scan mode, select
2:SCAN OPTION
- select the channel number - /
3:TONE
DATA
/
1:CTCSS
or
2:DCS
by rotating the
VFO
and pressing
E
, than press
L/O
.
2) For Search mode, select
1:SERVICE OPTION
/
:CHAIN SEARCH
/
5:TONE DATA
/
1:CTCSS
or
2:DCS
by rotating the
VFO
and pressing
E
, than
press
L/O
.
☞
Remember! You can also use
▲
or
▼
instead of rotating the
VFO
.
Also instead of pressing
E
, you can press the
VFO
control.
Note
: • To unlock the tone, press
E
instead of pressing
L/O
on step 1) or 2).
• CTCSS: Continuous Tone Coded Squelch System.
• DCS: Digital Coded Squelch.
• When Search mode and Tone Search are selected, the display shows the
frequency and tone data alternately.
• If the delay feature (-2 sec/-5 sec/-10 sec) has been set while in Tone search
mode, it resumes scanning according to the delay period.
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 37
