52
Adjusting the Key Beep
[MENU]
Settings
F
Adjust Key Beep
F
Auto
— the scanner automatically sets the key beep to match the master volume
setting level you select.
Level 1
-
15
— the scanner lets you manually select one of fifteen key beep
levels. As you turn the
Scroll Control
, the beep gets louder. Press
F
when you
reach the desired level.
Off
— the scanner turns the key beep off.
Setting the Audio AGC
[MENU]
Settings
F
Set
Audio AGC
F
This setting helps balance the audio level you hear as you listen to different radio
sources so you can hear them at a similar volume. Use this setting if you listen to
an audio source that has natural changes in audio level for which you want to
compensate.
You can set the mode to be on or off.
to select either
on
or
off
.
on
— AGC is enable.
Off
— AGC is disable.
Setting the Display Orientation
[MENU]
Settings
F
Set Upside-down
F
This setting controls the orientation of the display. If you set Upside-down to
On
,
the scanner inverts the display text and graphics.
Adjusting the Display Contrast
There are 15 contrast levels. As you scroll from level 1 to 15 you see the contrast
change. Press the
Scroll Control
to lock the desired level until the time you desire
to change it.
UB356ZH.fm Page 52 Wednesday, December 19, 2007 11:28 AM