76
Select a site
F
Edit Band Plan
F
You can enter up to 3 band plans. Select the plan to enter or edit, then follow the
prompts to enter the Base Frequency, Channel Step, and Channel Offset for the
site.
[MENU]
Program System
F
Select a trunked system
F
Edit Site (current)
F
Select site
F
Set C-Ch Only
F
This setting determines the frequencies you need to enter for Motorola systems.
Select your setting, then press
F
.
On
— You only need to enter control channel frequencies.
Off
— You must enter all voice and control channel frequencies.
Note:
The scanner defaults to
On
.
[MENU]
Program System
F
Select a trunked system
F
Edit Site (current)
F
Select a site
F
Set LocationInfo
F
This setting control whether the system is automatically enabled and disabled
when you connect a GPS to the scanner.
Set Latitude
— Enter the system’s latitude using the format you selected in the
system settings.
Set Longitude
— Enter the system’s longitude using the format you selected in
the system settings.
Set Range
— Set the system’s range using the units you selected in the system
settings.
Set GPS Enable
— Depending on the data received from the GPS, the L/O
status of the site is automatically controlled.
Setting Control-Channel Only Mode
M
Setting Site Location Information
MESL
UB356ZH.fm Page 76 Wednesday, December 19, 2007 11:28 AM