UBCD396XT
122
Delete Site
Delete this site and all its settings; this includes any frequencies.
New Site
Create a new site.
Options available for Motorola systems
See
Edit Band Plan
See
P25 Waiting Time
Options available for P25 systems
Edit Band Plan (P25)
Most P25 systems include the band plan information in the control channel data.
However, if a system does not include this information, you can program it
manually.
The scanner will prompt you for the following information:
Band plan
number
Select one of the 16 available band plan slots.
Input Base
Freq
Enter the lower limit of the band frequency.
Valid frequencies are between 25.00000 MHz and 1300.00000
MHz at each 5.0 Hz step (25.000000 MHz, 25.000005 MHz,
25.000010 MHz, etc.).
Input Spacing
Enter the number of kHz between each channel.
Valid spacings range between 125 kHz and 128 kHz at each 125
Hz step (125.000 kHz, 125.125 kHz, 125.250 kHz, etc.)
When you're finished, the scanner renames the band plan in the following pattern:
{band plan number} :{base frequency} / {spacing}
Summary of Contents for UBCD396XT
