UBCD396XT
141
40. Edit Band Plan
(Motorola systems only) The scanner prompts you to choose one of the two
standard band plan types:
800/900 Standard
or
800 Splinter
. Choose
Custom
if you
need to create your own band plan.
Creating a custom band plan
You will need to create a custom band plan for a Motorola VHF, UHF, and 800
MHz system. When you select
Custom
, the scanner prompts you for the following
information:
Band plan number
Select one of the 6 available band plan numbers, from
Band Plan 1
through
Band
Plan 6
.
Set Base Freq
1.
Input the lower limit of the band frequency.
2.
Input the upper limit of the band frequency.
(See
Calculating upper base frequencies
for more information.)
Set Offset
Enter the offset.
Set Spacing
Select the number of kHz between each channel. Your options are:
5.00 6.25 10.00 12.50 15.00 18.75 20.00 25.00
30.00 31.25 35.00 37.50 40.00 43.75 45.00 50.00
55.00 56.25 60.00 62.50 65.00 68.75 70.00 75.00
80.00 81.25 85.00 87.50 90.00 93.75 95.00 100.00
Summary of Contents for UBCD396XT
