UBCD396XT
147
Decide whether the scanner triggers an alert tone and light when it detects a close
call hit. (Compare this to the system setting
Emergency Alert
, which triggers a
tone and light when a Talk Group contains an emergency flag.) The available
options for
Set Alert
Tone
and
Set Alert Light
are common to both types of alerts.
Set Alert Tone
Set Alert Light
Set CC Pause
Choose how long you want the scanner to pause on a close call hit before going
back to its previous operation; this setting only applies when the Set CC Override
feature is turned off. Choose a pause time of 3, 5, 10, 15, 30, 45, or 60 seconds. If
you want the scanner to wait for your input whenever it detects a close call hit,
select Infinite.
Set CC Bands
Choose whether you want the scanner to search for close call hits on the frequency
bands listed below. Select each band you want to search, then press
YES
to turn
that band
On
.
The scanner only searches for close call hits on bands that are turned on.
Band Frequencies
VHF Low
1
25.0000–53.9900 MHz
VHF Low
2
54.0000–107.9000 MHz
Air Band
108.0000–136.9875 MHz
VHF
High 1
137.0000–224.9000 MHz
VHF
High 2
225.0000–319.9750 MHz
UHF
320.0000–520.0000 MHz
Summary of Contents for UBCD396XT
